ALDI ABP1815MA Instruction Manual Download Page 31

Page: 31 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

CDT218XA.9 • 2323 • 05/2019

e-mail:

[email protected]

injury.

f) Do not expose a battery pack or tool to fire or excessive

temperature.

Exposure to fire or temperature above 130 °C

may cause explosion.

g) Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specified in the instructions.

Charging improperly or at

temperatures outside the specified range may damage the

battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will

ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery

packs should only be performed by the manufacturer or

authorized service providers.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands