21
21
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
CSC165XA.9 • 2323 • 05/2019
MODEL No.:
CSC165XA.9 • 2323 • 05/2019
The dust extraction adapter (15) must not be mounted when
there is no external dust extraction connected.
Otherwise
there is danger of the extraction system becoming clogged.
Clean the dust extraction adapter (15) regularly to ensure optimum
dust extraction. The vacuum cleaner / dust extraction device must be
suitable for the material to be worked.
8.5 Hand grip position (See Fig. F)
Always hold your saw firmly with both hands when operating.
E
F
8.6 Switching on and off (See Fig. G)
Your switch is locked off to prevent accidental starting. Depress the
lock off button (1) then press in the trigger switch (2) and release
the lock off button (1). The power is now locked on. To switch off,
just release the trigger switch (2).
The blade may continue to rotate after switching off. Wait until the
machine comes to a complete stop before setting down.
8.7 Cutting guide (See Fig. H1, H2)
WARNING:
Always ensure that the saw is switched of and the
battery pack (16) is removed before making any adjustments.
There are 2 x cutting mark notches (8 -45°, 9 - 0°) on the front of the
base plate for use with the parallel guide (10). For straight cuts, use
the 0º cutting mark (9) to align with your parallel guide scale. For a
45º bevel cut, use the 45º cutting mark (8) to align the the parallel
guide scale. Always make a trial cut to check the setting.
