ALDI ABP1815MA Instruction Manual Download Page 111

Page: 111 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

CPS18WA.9 • 2323 • 05/2019

e-mail:

[email protected]

f) Do not expose a battery pack or tool to fire or excessive

temperature.

Exposure to fire or temperature above 130 °C

may cause explosion.

g) Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specified in the instructions.

Charging improperly or at

temperatures outside the specified range may damage the

battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will

ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery

packs should only be performed by the manufacturer or

authorized service providers.

6. Important information – Product care

For any issuses related directly to your Battery / charger, contact

the Customer Service of the manufacturer as listed on the battery /

charger packaging, manual or on the label on the battery / charger.

This Detail Sander uses Lithium Ion Battery Cells. Care MUST be taken

to ensure both the safety and life of the pack is maintained. Ensure you

have read all of the safety notes in the previous pages before using the

Detail Sander.

Treat the battery pack with care and within the guidelines of this manual.

If the battery pack does become immersed in water or any fluids,

or is subject to a severe drop or it does not operate within the

guidelines of this manual or the supplied manual, immediately STOP

using the battery pack and have it checked.

Use only the batteries and charger included with this kit, or any

ALDI 20V Li-Ion Xfinity Plus batteries and chargers.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands