Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 403 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 403
Peer Commands
peer
Syntax [ no ] peer ip-address
Context config>redundancy>multi-chassis
Description
This command configures a multi-chassis redundancy peer.
Parameters
ip-address — Specifies a peer IP address. Multicast address are not allowed.
authentication-key
Syntax authentication-key [ authentication-key | hash-key ] [ hash | hash2 ]
no authentication-key
Context config>redundancy>multi-chassis>peer
Description This command configures the authentication key used between this node and the multi-chassis peer. The
authentication key can be any combination of letters or numbers.
Parameters authentication-key — Specifies the authentication key. Allowed values are any string up to 20 characters
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
hash-key — The hash key. The key can be any combination of ASCII characters up to 33 (hash1-key) or 55
(hash2-key) characters in length (encrypted). If spaces are used in the string, enclose the entire string in
quotation marks (“ ”).
hash — Specifies the key is entered in an encrypted form. If the hash or hash2 parameter is not used, the
key is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash or hash2 parameter specified.
hash2 — Specifies the key is entered in a more complex encrypted form that involves more variables then
the key value alone, this means that hash2 encrypted variable cannot be copied and pasted. If the hash or
hash2 parameter is not used, the key is assumed to be in a non-encrypted, clear text form. For security,
all keys are stored in encrypted form in the configuration file with the hash or hash2 parameter
specified.