Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 94 / 502

Basic CLI Commands
Page 94 7950 SR OS Basic System Configuration Guide
There are two ways to verify that a user is in the enable-admin mode:
•
show users —
Administrator can know which users are in this mode.
• Enter the
enable-admin
command again at the root prompt and an error message will be returned.
A:ALA-1# show users
===============================================================================
User Type From Login time Idle time
===============================================================================
admin Console -- 10AUG2006 13:55:24 0d 19:42:22
admin Telnet 10.20.30.93 09AUG2004 08:35:23 0d 00:00:00 A
-------------------------------------------------------------------------------
Number of users : 2
'A' indicates user is in admin mode
===============================================================================
A:ALA-1#
A:ALA-1#
enable-admin
MINOR: CLI Already in admin mode.
A:ALA-1#
back
Syntax back
Context <GLOBAL>
Description
This command moves the context back one level of the command hierarchy. For example, if the current
level is the
config router ospf context, the back command moves the cursor to the config router context
level.
clear
Syntax clear
Context <GLOBAL>
Description
This command clears statistics for a specified entity or clears and resets the entity.
Parameters
card — Reinitializes a I/O module in the specified slot.
cflowd — Clears cflowd.
cpm-filter — Clears IP filter entry IDs.
cron — Clears CRON history.
filter — Clears IP, MAC, and log filter counters.
lag — Clears LAG-related entities.
log — Closes and reinitializes the log specified by log-id.
mda — Reinitializes the specified
XMA/MDA
in a particular slot.
port — Clears port statistics.