Alcatel-Lucent 7950 XRS Series Configuration Manual Download Page 207

Page: 207 / 502

Boot Option Files

7950 SR OS Basic System Configuration Guide

Page 207

secondary-config

Syntax

secondary-config file-url
no secondary-config

Context

bof

Description

This command specifies the name and location of the secondary configuration file.

The system attempts to use the configuration as specified in

secondary-config

if the primary config cannot

be located. If the

secondary-config

file cannot be located, the system attempts to obtain the configuration

from the location specified in the

tertiary-config

Note that if an error in the configuration file is encountered, the boot process aborts.

The

form of the command removes the

secondary-config

configuration.

Default

none

Parameters

file-url —

The secondary configuration file location, expressed as a file URL.

Values

file-url

[

local-url

remote-url

] (up to 180 characters)

local-url [

cflash-id

/][

file-path

]

remote-url

[{ftp://|tftp://}

login:pswd@remote-locn

/][

file-path

]

cflash-id

cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:

secondary-image

Syntax

secondary-image file-url
no secondary-image

Context

bof

Description

This command specifies the secondary directory location for runtime image file loading.

The system attempts to load all runtime image files configured in the

primary-image

first. If this fails, the

system attempts to load the runtime images from the location configured in the

secondary-image

. If the

secondary image load fails, the tertiary image specified in

tertiary-image

is used.

All runtime image files (*.tim files) must be located in the same directory.

The

form of the command removes the

secondary-image

configuration.

Default

none

Parameters

file-url —

The

file-url

can be either local (this

CPM

) or a remote FTP server.

Values

file-url

[

local-url

remote-url

] (up to 180 characters)

local-url [

cflash-id

/][

file-path

]

remote-url

[{ftp://|tftp://}

login:pswd@remote-locn

/][

file-path

]

cflash-id

cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:

Summary of Contents for 7950 XRS Series























































































































































































































































































































































































































































































































Search results

Summary of Contents for 7950 XRS Series

Reviews:

Related manuals for 7950 XRS Series

Brands by name

Popular brands

Alcatel-Lucent 7950 XRS Series, Configuration Manual

Search results

Summary of Contents for 7950 XRS Series

Reviews:

Related manuals for 7950 XRS Series

Brands by name

Popular brands