Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 413 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 413
path-excl
Syntax [ no ] path-excl
Context config>redundancy>mc>peer>mcr>ring
Description
This command specifies the set of upper-VLAN IDs associated with the SAPs that are to be excluded from
control by the multi-chassis ring.
Default
If not specified, the default is an empty set.
ring-node
Syntax ring-node ring-node-name [ create ]
no ring-node ring-node-name
Context config>redundancy>mc>peer>mcr>ring
Description
This command specifies the unique name of a multi-chassis ring access node.
Parameters
ring-node-name — Specifies the unique name of a multi-chassis ring access node.
create — Keyword used to create the ring node instance. The create keyword requirement can be enabled/
disabled in the environment>create context.
connectivity-verify
Syntax connectivity-verify
Context config>redundancy>mc>peer>mcr>ring>ring-node
Description
This command enables the context to configure node connectivity check parameters.
dst-ip
Syntax dst-ip ip-address
no dst-ip
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description
This command configures the node cc destination IP address.
Default
no dst-ip
Parameters
ip-address — Specifies the destination IP address used in the inband control connection.