manualshive.com logo in svg

Alcatel-Lucent 7950 XRS Series, Configuration Manual

The Alcatel-Lucent 7950 XRS Series is a high-performance router designed for network operators. Discover its full potential with our comprehensive Configuration Manual, available for free download at manualshive.com. This manual will guide you through setting up and optimizing your network with ease.

Share
Download
background image

System Commands

Page 456

7950 SR OS Basic System Configuration Guide

mc-endpoint endpoint

 [

mcep-id

] 

statistics

mc-endpoint peer

 [

ip-address

]

Context

show>redundancy>multi-chassis

Description

This command displays multi-chassis endpoint information.

Parameters

statistics — 

Displays the global statistics for the MC endpoint.

peer ip-address — 

Specifies the IP address of multi-chassis end-point peer.

endpoint mcep-id — 

Specifies the nulti-chassis endpoint.

Values

1 — 4294967295

Sample Output

*A:Dut-B# show redundancy multi-chassis mc-endpoint statistics 

===============================================================================

Multi-Chassis Endpoint Global Statistics

===============================================================================

Packets Rx                                  : 533                              

Packets Rx Keepalive                        : 522                              

Packets Rx Config                           : 3                                

Packets Rx Peer Config                      : 1                                

Packets Rx State                            : 7                                

Packets Dropped Keep-Alive Task             : 7                                

Packets Dropped Too Short                   : 0                                

Packets Dropped Verify Failed               : 0                                

Packets Dropped Tlv Invalid Size            : 0                                

Packets Dropped Out Of Seq                  : 0                                

Packets Dropped Unknown Tlv                 : 0                                

Packets Dropped Tlv Invalid MC-Endpoint Id  : 0                                

Packets Dropped MD5                         : 0                                

Packets Dropped Unknown Peer                : 0                                

Packets Dropped MC Endpoint No Peer         : 0                                

Packets Tx                                  : 26099                            

Packets Tx Keepalive                        : 8221                             

Packets Tx Config                           : 2                                

Packets Tx Peer Config                      : 17872                            

Packets Tx State                            : 4                                

Packets Tx Failed                           : 0                                

===============================================================================

*A:Dut-B# 

*A:Dut-B# show redundancy multi-chassis mc-endpoint peer 3.1.1.3 statistics 

===============================================================================

Multi-Chassis MC-Endpoint Statistics

===============================================================================

Peer Addr                         : 3.1.1.3                                    

-------------------------------------------------------------------------------

Packets Rx                        : 597                                        

Packets Rx Keepalive              : 586                                        

Packets Rx Config                 : 3                                          

Packets Rx Peer Config            : 1                                          

Packets Rx State                  : 7                                          

Packets Dropped State Disabled    : 0                                          

Packets Dropped Packets Too Short : 0                                          

Summary of Contents for 7950 XRS Series























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7950 XRS Series

Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
Texas Instruments ThunderLAN TNETE100A Programmer'S Manual preview
ThunderLAN TNETE100A
Brand: Texas Instruments Pages: 179
H3C CR1606-F Installation Instructions Manual preview
CR1606-F
Brand: H3C Pages: 12
Justec JDR454WV4 User Manual preview
JDR454WV4
Brand: Justec Pages: 61
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
BEC 7404 Series User Manual preview
7404 Series
Brand: BEC Pages: 159
Digisol DG-BG100 User Manual preview
DG-BG100
Brand: Digisol Pages: 81
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
TP-Link Archer C7 How To Set Up preview
Archer C7
Brand: TP-Link Pages: 4
Addonics Technologies Network Adapter ADZIFCF Installation Manual preview
Network Adapter ADZIFCF
Brand: Addonics Technologies Pages: 1
Juniper TX MATRIX Hardware Manual preview
TX MATRIX
Brand: Juniper Pages: 396
Gtran Wireless DotSurfer GPC-2100 User Manual preview
DotSurfer GPC-2100
Brand: Gtran Wireless Pages: 44
BinTec BinGO! DSL II Quick Install Manual preview
BinGO! DSL II
Brand: BinTec Pages: 2
ADTRAN 1202880E1 Quick Start Manual preview
1202880E1
Brand: ADTRAN Pages: 4
YTTEK Y.FORCE YTPC400 Quick Start Manual preview
Y.FORCE YTPC400
Brand: YTTEK Pages: 26
Costar CDC2500LX User Manual preview
CDC2500LX
Brand: Costar Pages: 51
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8
Digi TransPort WR41 Quick Start Manual preview
TransPort WR41
Brand: Digi Pages: 2

Brands by name

Popular brands

Load more brands