Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 308 / 502

Edit Mode
Page 308 7950 SR OS Basic System Configuration Guide
Edit Mode
To enter the mode to edit timing references, you must enter the begin keyword at the
config>system>sync-if-timing# prompt.
Use the following CLI syntax to enter the edit mode:
CLI Syntax:
config>system>sync-if-timing
begin
The following error message displays when the you try to modify sync-if-timing parameters
without entering the keyword begin .
A:ALA-12>config>system>sync-if-timing>ref1# source-port 2/1/1
MINOR: CLI The sync-if-timing must be in edit mode by calling begin before any changes can
be made.
MINOR: CLI Unable to set source port for ref1 to 2/1/1
A:ALA-12>config>system>sync-if-timing>ref1#