Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 478 / 502

System Commands
Page 478 7950 SR OS Basic System Configuration Guide
Admin Status
down —
The ref1 or ref2 configuration is administratively shutdown.
up —
The ref1 or ref2 configuration is administratively enabled.
diag —
Indicates the reference has been forced using the force-reference
command.
Quality Level
Override
Indicates whether the QL value used to determine the reference was config-
ured directly by the user.
Rx Quality Level
Indicates the QL value received on the interface.
• inv - SSM received on the interface indicates an invalid code for the inter-
face type.
• unknown - No QL value was received on the interface.
Qualified for Use Indicates whether the reference has been qualified to be used as a source of
timing for the node.
Not Qualified Due
To
Indicates the reason why the reference has not been qualified:
- disabled
- LOS
- OOPIR
- OOF
Selected for Use Indicates whether the method is presently selected.
Not Selected Due
To
Indicates the reason why the method is not selected:
- disabled
- not qualified
- previous failure
- LOF
- AIS-L
- validating
- on standby
- ssm quality
Source Port Identifies the Source port for the reference.
Interface Type The interface type configured for the BITS port.
Framing The framing configured for the BITS port.
Line Coding The line coding configured for the BITS port.
Line Length The line length value of the BITS output.
Output Admin Sta-
tus
down —
The BITS output is administratively shutdown.
up —
The BITS output is administratively enabled.
Label Description (Continued)