Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 129 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 129
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
router
Syntax router router-instance
Context monitor
Description
This command enables the context to configure criteria to monitor statistical information for BGP, LDP,
MPLS, OSPF, OSPF3, PIM, RIP, and RSVP protocols.
Parameters
router-instance — Specify the router name or service ID.
Values
router-name : Base, management
service-id : 1 — 2147483647
Default
Base
neighbor
Syntax neighbor ip-address [ ip-address ...(up to 5 max)] [ interval seconds ] [ repeat repeat ] [ absolute |
rate ]
Context monitor>router>bgp
Description
This command displays statistical BGP neighbor information at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the specified neighbor(s). The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters neighbor ip-address — Displays damping information for entries received from the BGP neighbor. Up to 5
IP addresses can be specified.
interval seconds — Configures the interval for each display in seconds.
Default 5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.