manualshive.com logo in svg

Alcatel-Lucent 7950 XRS Series, Configuration Manual

The Alcatel-Lucent 7950 XRS Series is a high-performance router designed for network operators. Discover its full potential with our comprehensive Configuration Manual, available for free download at manualshive.com. This manual will guide you through setting up and optimizing your network with ease.

Share
Download
background image

Root Commands

7950 SR OS Basic System Configuration Guide

Page 119

===============================================================================

Monitor statistics for IPv6 filter 100 entry 10

-------------------------------------------------------------------------------

At time t = 0 sec (Base Statistics)

-------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

-------------------------------------------------------------------------------

At time t = 3 sec (Mode: Absolute)

-------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

-------------------------------------------------------------------------------

At time t = 6 sec (Mode: Absolute)

-------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

-------------------------------------------------------------------------------

At time t = 9 sec (Mode: Absolute)

-------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 01

===============================================================================

A:ALA-48#

A:ALA-48# monitor filter ipv6 100 entry 10 interval 3 repeat 3 rate

==============================================================================

Monitor statistics for IPv6 filter 100 entry 10

------------------------------------------------------------------------------

At time t = 0 sec (Base Statistics)

------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

------------------------------------------------------------------------------

At time t = 3 sec (Mode: Rate)

------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

------------------------------------------------------------------------------

At time t = 6 sec (Mode: Rate)

------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

------------------------------------------------------------------------------

At time t = 9 sec (Mode: Rate)

------------------------------------------------------------------------------

Ing. Matches : 0                                Egr. Matches   : 1

==============================================================================

A:ALA-48#

mac 

Syntax

mac

 

mac-filter-id

 

entry

 

entry-id

 [

interval

 

seconds

] [

repeat

 

repeat

] [

absolute

 | 

rate

]

Context

monitor>filter

Description

This command enables MAC filter monitoring. The statistical information for the specified MAC filter entry 
displays at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified MAC filter.  The subsequent statistical 
information listed for each interval is displayed as a delta to the previous display. When the keyword 

rate

 is 

specified, the "rate per second" for each statistic is displayed instead of the delta. 

Summary of Contents for 7950 XRS Series























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7950 XRS Series

D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 17
D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Brand: 3onedata Pages: 33
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
Paradyne 7610 Overview preview
7610
Brand: Paradyne Pages: 2
N-Tron 702-W User Manual & Installation Manual preview
702-W
Brand: N-Tron Pages: 62
Ericsson Marconi OMS 1200 Product Description preview
Marconi OMS 1200
Brand: Ericsson Pages: 136
Paradyne Hotwire ATM Line Cards 8335 User Manual preview
Hotwire ATM Line Cards 8335
Brand: Paradyne Pages: 132
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Brand: Brocade Communications Systems Pages: 305
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24

Brands by name

Popular brands

Load more brands