Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 102 / 502

Basic CLI Commands
Page 102 7950 SR OS Basic System Configuration Guide
mrinfo
Syntax mrinfo [ ip-address | dns-name ] [ router router-instance ]
Context <GLOBAL>
Description This command is used to print relevant multicast information from the target multicast router. Information
displayed includes adjacency information, protocol, metrics, thresholds, and flags from the target multicast
route
Parameters ip-address — Specify the ip-address of the multicast capable target router.
dns-name — Specify the DNS name (if DNS name resolution is configured).
Values 63 characters maximum
router router-instance — Specify the router name or service ID.
Values router-name : Base, management
service-id : 1 — 2147483647
Default Base
mstat
Syntax mstat source [ ip-address | dns-name ] [ group grp-ip-address ] [ destination dst-ip-address ] [ hop
hop ] [ router router-instance ] [ wait-time wait-time ]
Context <GLOBAL>
Description This command traces a multicast path from a source to a receiver and displays multicast packet rate and loss
information.
Parameters source ip-address — Specify the IP address of the multicast-capable source.
ip-address — Specify the ip-address of the multicast capable target router.
dns-name — Specify the DNS name (if DNS name resolution is configured).
Values 63 characters maximum
group group-ip-address — Specify the multicast address of the group to be displayed.
destination dst-ip-address — Specify the unicast destination address.
hop count — Specify the maximum number of hops that will be traced from the receiver back toward the
source.
Values 1 — 255
Default 32 hops (infinity for the DVMRP routing protocol).
router router-instance — Specify the router name or service ID.
Values router-name : Base, management
service-id : 1 — 2147483647