Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 211 / 502

Boot Option Files
7950 SR OS Basic System Configuration Guide Page 211
If the port is configured to autonegotiate this parameter is ignored.
Default
speed 100 — 100 M/bps operation.
Parameters
10 — Sets the link to 10 M/bps speed.
100 — Sets the link to 100 M/bps speed.
static-route
Syntax [ no ] static-route ip-prefix/ip-prefix-length next-hop ip-address
Context bof
This command creates a static route entry for the
CPM
management Ethernet port in the running
configuration and the Boot Option File (BOF).
This command allows manual configuration of static routing table entries. These static routes are only used
by traffic generated by the
CPM
Ethernet port. To reduce configuration, manual address aggregation should
be applied where possible.
A static default (0.0.0.0/0 or ::/0) route cannot be configured on the
CPM
Ethernet port. A maximum of 10
static routes can be configured on the
CPM
port.
The no form of the command deletes the static route.
Default
No default routes are configured.
Parameters
ip-prefix/ip-prefix-length — The destination address of the static route in dotted decimal notation.
Values
ip-prefix/ip-prefix-length: ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-le 0 — 32
ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
ipv6-prefix-le 0 — 128
ip-address: ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
mask — The subnet mask, expressed as an integer or in dotted decimal notation.
Values
1 — 32 (mask length), 128.0.0.0 — 255.255.255.255 (dotted decimal)
next-hop ip-address — The next hop IP address used to reach the destination.