Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 425 / 502

Show Commands
7950 SR OS Basic System Configuration Guide Page 425
Show Commands
S
YSTEM
C
OMMANDS
connections
Syntax connections [ address ip-address [ interface interface-name ]] [ port port-number ] [ detail ]
Context show>system
Description
This command displays UDP and TCP connection information.
If no command line options are specified, a summary of the TCP and UDP connections displays.
Parameters
ip-address — Displays only the connection information for the specified IP address.
Values
ipv4-address: a.b.c.d (host bits must be 0)
ipv6-address: x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x:
[0 — FFFF]H
d: [0 — 255]D
interface: 32 characters maximum, mandatory for link local
addresses
port-number — Displays only the connection information for the specified port number.
Values
0 — 65535
detail — Appends TCP statistics to the display output.
Output Standard Connection Output —
The following table describes the system connections output fields.
Label Description
Proto Displays the socket protocol, either TCP or UDP.
RecvQ Displays the number of input packets received by the protocol.
TxmtQ
Displays
the
number of output packets sent by the application.
Local Address Displays the local address of the socket. The socket port is separated by a
period.
Remote Address Displays the remote address of the socket. The socket port is separated by a
period.
State
Listen —
The protocol state is in the listen mode.
Established —
The protocol state is established.