Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 338 / 502

System Command Reference
Page 338 7950 SR OS Basic System Configuration Guide
LSR - will spray traffic based on label or IP hash criteria outlined above or both based on configuration of
lsr-load-balancing, l4-load-balancing and system-ip-load-balancing.
The no form preserves the default behavior for per flow hashing of multicast traffic.
lacp-system-priority
Syntax lacp-system-priority lacp-system-priority
no lacp-system-priority
Context config>system
Description This command configures the Link Aggregation Control Protocol (LACP) system priority on aggregated
Ethernet interfaces. LACP allows the operator to aggregate multiple physical interfaces to form one logical
interface.
Default 32768
Parameters lacp-system-priority — Specifies the LACP system priority.
Values 1 — 65535
location
Syntax location location
no location
Context config>system
Description This command creates a text string that identifies the system location for the device.
Only one location can be configured. If multiple locations are configured, the last one entered overwrites the
previous entry.
The no form of the command reverts to the default value.
Default none — No system location is configured.
Parameters location — Enter the location as a character string. The string may be up to 80 characters long. Any
printable, seven-bit ASCII characters can be used within the string. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
name
Syntax name system-name
no name
Context config>system
Description This command creates a system name string for the device.