Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 153 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 153
Default
10 seconds
Values
10|20|30|40|50|60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
neighbor
Syntax neighbor neighbor [ neighbor ...(up to 5 max)] [ interval seconds ] [ repeat repeat ] [ absolute | rate ]
Context monitor>router>rip
Description
This command displays statistical RIP neighbor information at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the specified RIP neighbor(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword
rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — The IP address to display information for entries received from the specified RIP
neighbor. Up to 5 IP addresses can be displayed.
interval seconds — Configures the interval for each display in seconds.
Default
5 seconds
Values
3 — 60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
interface