Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 155 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 155
The first screen displays the current statistics related to the service-id . The subsequent statistical
information listed for each interval is displayed as a delta to the previous display. When the keyword rate is
specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters service-id — The unique service identification number which identifies the service in the service domain.
sap
Syntax sap sap-id [ interval seconds ] [ repeat repeat ] [ absolute | rate ]
Context monitor>service>id service-id
Description This command monitors statistics for a SAP associated with this service.
This command displays statistics for a specific SAP, identified by the port-id and encapsulation value, at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical information
listed for each interval is displayed as a delta to the previous display. When the keyword
rate is specified,
the “rate per second” for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor com-
mands display the selected statistics according to the configured number of times at the interval specified.
Parameters
sap-id — Specifies the physical port identifier portion of the SAP definition.
sap-id : null [ port-id | lag-id ]
dot1q [ port-id | lag-id ]: qtag1
qinq [ port-id | lag-id ]: qtag1.qtag2
port-id slot/mda/port
lag-id lag- id
lag keyword
id 1 — 200
id 1 — 64
qtag1 0 — 4094
qtag2 *, 0 — 4094
port-id — Specifies the physical port ID in the slot/mda/port format.
If the card in the slot has
XMAs/MDAs
installed, the port-id must be in the slot_number/
MDA_number/port_number format. For example 6/2/3 specifies port 3 on
XMA/MDA
2 in slot 6.
The port-id must reference a valid port type.
qtag1, qtag2 — Specifies the encapsulation value used to identify the SAP on the port or sub-port. If this
parameter is not specificially defined, the default value is 0.
Values
qtag1: 0 — 4094
qtag2 : * | 0 — 4094