Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 345 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 345
cflash-cap-warn
Syntax cflash-cap-warn cflash-id rising-threshold threshold [ falling-threshold threshold ] interval
seconds [ rmon-event-type ] [ startup-alarm alarm-type ]
no cflash-cap-warn cflash-id
Context config>system>thresholds
Description
This command enables capacity monitoring of the compact flash specified in this command. The severity
level is warning. Both a rising and falling threshold can be specified. The no form of this command removes
the configured compact flash threshold warning.
Parameters
cflash-id — The cflash-id specifies the name of the cflash device to be monitored.
Values
cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
rising-threshold threshold — Specifies a threshold for the sampled statistic. When the current sampled
value is greater than or equal to this threshold, and the value at the last sampling interval was less than
this threshold, a single threshold crossing event will be generated. A single threshold crossing event
will also be generated if the first sample taken is greater than or equal to this threshold and the
associated startup-alarm is equal to rising or either.
After a rising threshold crossing event is generated, another such event will not be generated until the
sampled value falls below this threshold and reaches less than or equal the falling-threshold value.
Default
0
Values
-2147483648 — 2147483647
falling-threshold threshold — Specifies a threshold for the sampled statistic. When the current sampled
value is less than or equal to this threshold, and the value at the last sampling interval was greater than
this threshold, a single threshold crossing event will be generated. A single threshold crossing event
will also be generated if the first sample taken is less than or equal to this threshold and the associated
startup-alarm is equal to falling or either.
After a falling threshold crossing event is generated, another such event will not be generated until the
sampled value rises above this threshold and reaches greater than or equal the rising-threshold value.
Default
0
Values
-2147483648 — 2147483647
interval seconds — Specifies the polling period over which the data is sampled and compared with the
rising and falling thresholds.
Values
1 — 2147483647
rmon-event-type — Specifies the type of notification action to be taken when this event occurs.
Values
log — In the case of log, an entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The RMON-MIB log table entries
can be viewed using the show>system>thresholds CLI command.
trap — In the case of trap, a TiMOS logger event is generated. The TiMOS logger utility
then distributes the notification of this event to its configured log destinations which may
be CONSOLE, telnet session , memory log, cflash file, syslog, or SNMP trap destinations
logs.