Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 333 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 333
System Information Commands
boot-bad-exec
Syntax boot-bad-exec file-url
no boot-bad-exec
Context config>system
Description
Use this command to configure a URL for a CLI script to exec following a failure of a boot-up
configuration. The command specifies a URL for the CLI scripts to be run following the completion of the
boot-up configuration. A URL must be specified or no action is taken.
The commands are persistent between router (re)boots and are included in the configuration saves
(
admin>save ).
Default no boot-bad-exec
Parameters file-url — Specifies the location and name of the CLI script file executed following failure of the boot-up
configuration file execution. When this parameter is not specified, no CLI script file is executed.
Values file url: local-url | remote-url: 255 chars max
local-url: [ cflash-id /][ file-path ]
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [
hostname | ipv4-address | [ ipv6- address ] ]
ipv4-address a.b.c.d ipv6-address - x:x:x:x:x:x:x:x[-
interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id: cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
Related
Command
s
exec command on page 95 — This command executes the contents of a text file as if they were CLI
commands entered at the console.
boot-good-exec
Syntax boot-good-exec file-url
no boot-good-exec
Context config>system
Description Use this command to configure a URL for a CLI script to exec following the success of a boot-up
configuration.
Default no boot-good-exec