Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 145 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 145
ospf
Syntax ospf [ ospf-instance ]
Context monitor>router>ospf
Description
This command enables the context to configure monitor commands for the OSPF instance.
Parameters
ospf-instance — Specifies the OSPF instance.
Values
1 — 31
ospf3
Syntax ospf3
Context monitor>router
Description
This command enables the context to configure monitor commands for the OSPF3 instance.
interface
Syntax interface interface [ interface ...(up to 5 max)] [ interval seconds ] [ repeat repeat ] [ absolute | rate ]
Context monitor>router>ospf
monitor>router>ospf3
monitor>router>ospf3
Description
This command displays statistics for OSPF interfaces at the configured interval until the configured count is
reached.
The first screen displays the current statistics related to the OSPF interface(s). The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the “rate per second” for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters interface — Specify the interface's IP address ( ip-addres s) or interface name ( ip-int-name ). Up to 5
interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
interval seconds — Configures the interval for each display in seconds.
Default 5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999