Page
46
of
84
4.5.2.2 Anybus/Modbus TCP/Ethernet IP Outputs
Press
to enter Output Configuration Screen (below)
Element Type:
Choose from Byte, Int16 or Int32.
Element:
Shows Element # being
configured.
Bit:
Enter Bit #
Polarity:
Select Normally Open or Normally
Closed Outputs.
Mode:
•
Normal:
Output signal sent.
•
Timed Singal Sent:
Time entered in
seconds
•
Flash Signal Sent:
Time entered in
seconds
Select desired Output Function(s) from list above
Click on
after appropriate changes are made.
Below is
an example of the Anybus Output screen with five Outputs set up
.
Click on
to make changes on an individual Element or return to
the Output Configuration screen.
Will delete element.
NOTE:
:
See Gen IV IEC Manual section 11.0 Assignable I/O for more
detail on Output Functions.
