Page
40
of
84
4.5.1.1 Lock Tool on Reject
When enabled, this prevents tool from starting a new rundown if the
result of the last rundown was a reject. Tool remains locked until one
of the four Unlock Mode conditions above are satisfied.
Unlock Mode:
The action that re-enables the tool for use.
•
Reverse:
Running tool in disassembly mode.
•
Reverse and Throttle:
Running tool in disassembly mode.
•
Reverse and Unlock Torque:
Exceeding “Unlock Torque” while
tool is in the disassembly direction (backing off a rejected
fastener).
•
MFB:
Pressing MFB button on tool (regardless of MFB
configuration).
Unlock Torque:
If Unlock Mode is set to “Reverse and Unlock Torque”,
this torque value must be exceeded when tool is in the disassembly
direction in order to unlock tool.
4.5.1.2 Buzzer
Buzzer Enable:
When enabled, the Buzzer will beep when a rundown is rejected. If a rundown is
rejected, the beeping can be stopped by making a successful rundown or by using the MFB.
4.5.1.3 Headlight
Headlight Enable:
Enables or Disables the Headlight (pistol style tools only).
