24
Futuresun HP V2
At the head and footend of the sunbed bench, put
a screwdriver into the notch at the foremost bar of
the rear hinge bracket (1).
With the screwdriver lift the balls at both sides
simultaneously out of the guide forks (2).
CAUTION
RISK OF DAMAGES TO
THE EQUIPMENT!
To prevent scratches or
damages to the top canopy
and the sunbed, put a piece
of styrofoam between the
top and the sunbed.
Close the top canopy.
Remove the screwdriver.
Removal of assembly plate for
SunFresh-container/condensation
water container
Loosen the two thumb screws at the assembly
plate of the SunFresh conainer/condensation water
container.
Remove the assembly plate for the SunFresh
container/condensation water container.
Disassembly of top canopy
At the right and left side of the top canopy there are
hinge brackets. These hinge brackets rest in the hinge
bearings of the sunbed bench. These hinge bearings
are at the right and left side of the sunbed bench. In
order to disassemble the top canopy 4 persons are
needed. Proceed as follows:
Straighten out the cables which lead from the top
canopy into the sunbed.
WARNING
RISK OF BRUISES!
When disassembling the top
canopy there is the risk of
bruising your hand.
When lifting the top, do not
hold on to hinge brackets.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...
