53
Futuresun HP V2
Replacement of top canopy
acrylic
Removal of top canopy acrylic
Replace the top canopy acrylic whenever it is
scratched or damaged. Proceed as follows:
Deactive the mains disconnection switch and
secure with lock and key against accidental
activation.
With a screwdriver push in the spring at the slot in
the top canopy acrylic.
Put a piece of styrofoam or some other soft
padding material between sunbed and top canopy
to protect the sunbed and the top canopy acrylic.
Turn the top profile inwards.
Lower the top canopy acrylic.
Loosen the plug connection of the control panel at
the rear side of the top canopy acrylic.
Put your index finger into the opening at the rear
side of the top canopy acrylic to pull up the plug
(1).
Then pull the plug at the cables through the smaller
opening (2).
In order to unscrew the control panel from the top
canopy acrylic, loosen the three screws of the
control panel at the rear side of the top canopy
acrylic.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...