25
Futuresun HP V2
WARNING
RISK OF STUMBLING!
When carrying the top
canopy the cables may
cause stumbling.
Make sure that all cables
are fixed to the top canopy.
WARNING
HEAVY LOAD!
Carrying the heavy
components of the sunbed
can lead to overstrain and
health risk.
Always carry the heavy
components of the sunbed
with 4 persons.
Of the 4 persons, one person each stands at the
front right and left side of the sunbed and one person
each at the rear right and left side of the sunbed. The
person at the rear side closest to the cable entry,
pulls the cables out of the opening of the sunbed and
makes sure that nobody trips over the cables.
4 persons lift the top canopy, tilting it slightly
forward to take it out of the bearings in the sunbed.
One person at the rear side of the sunbed pulls the
cables out of the opening in the sunbed.
Wind up the cables.
Store the top canopy on an even, soft support.
Revoming the sunbed from the
wooden pallet
The sunbed is fixed with a bracket to a wooden pallet.
These brackets are screwed with hexagonal screws to
the sunbed and to the wooden pallet. To remove the
sunbed from the wooden pallet, proceed as follows:
Loosen the nuts of the hexogonal screws at
the right and left side of the ground plate of the
sunbed.
4 persons lift the sunbed off the wooden pallet.
Put the sunbed on two padded dollies. Take care
that one dolly each supports the side panels.
Move the sunbed to the final place of installation.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...