20
Futuresun HP V2
Removal of sunbed acrylic
The sunbed acrylic is positioned on the sunbed. The
acrylic is connected to a profile at both ends of which
there are hinge joints. With these hinge joints the
acrylic is fixed to the hinge bolt.
To remove the sunbed acrylic from the sunbed,
proceed as follows:
Get a soft, even support for the acrylic ready.
Two persons lift the sunbed acrylic for approx. 30
cm.
Take out the sunbed acrylic pulling carefully
forward.
Store the sunbed acrylic on a soft, even support.
Removal of lamp coverings out of
the sunbed
To cover the lamps at the head- and footend side of
the sunbed, there are lamp coverings. These must
be removed in order to disassemble the air vents.
Proceed as follows:
Lift the lamp covering at the headend side.
To remove the plug for the backlighting of the front
cover plate, proceed as follows:
To loosen the plug connection, push the button
between the plug and the plug connection down (1)
and pull the plug out of the connection (2).
Take out the lamp covering at the footend side.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...