ADVANCED UV LIGHT Future Sun HP, Owner'S Manual

Page: 68 / 73

68
Futuresun HP V2

Put the new germicidal unit into the SunFresh
container.

Put the SunFresh container in such a way into the
fixing position so that it touches the sensor (1) .

Connect the supply plug to the mains connection
for the germicidal unit of the SunFresh system to
the ballast tray.

Reassemble the front cover plate as described in
the chapter "Assembly of front cover plate".

Lift up the sunbed acrylic for a few centimeters.

To put back the support bar, lift it slightly upwards,
then turn it down to the left side.

Put the sunbed acrylic down onto the sunbed.
Cleaning
DANGER
RISK OF ELECTRIC
SHOCK!
Deactivate the mains
disconnection switch prior to
any cleaning work and secure
with lock and key against
accidental activation.
CAUTION!
Cleaning solutions which
contain alcohol or etheric
oils can damage the sunbed.
Never clean the sunbed
with abrasive or corrosive
cleaning solutions.
Sunbed and top canopy
acrylic
The sunbed and top canopy acrylic must be
cleaned after every session.

Spray the top canopy and sunbed acrylic with
appropriate disinfection cleaner specificaly
designed for acrylic material.

Wipe acrylics dry with a clean, lint-free cloth.
Housing of sunbed and top
canopy

Clean the housing surfaces whenever necessary
with a slightly damp leather cloth.

Wipe the surfaces dry with a clean and lint-free
cloth.
UV- and backlighting lamps

Wipe the lamps with clean leather cloth, slightly
damped with glass cleaner or clear water.