manualshive.com logo in svg

ADVANCED UV LIGHT Future Sun HP, Owner'S Manual

Introducing the Future Sun HP, featuring ADVANCED UV LIGHT technology! Unlocking the full potential of this cutting-edge device is a breeze with the comprehensive Owner's Manual. Easily download your free manual from manualshive.com to discover the endless possibilities and maximize your experience with this remarkable product.

Share
Download
background image

19

Futuresun HP V2 

 

To unscrew the control panel from the top canopy 

acrylic, loosen the three (3) screws of the control 

panel at the rear side of the top canopy acrylic.

 

Two persons lift the top canopy acrylic off the 

sunbed.

Removal of filter glasses (top 

canopy)

WARNING – Glass 

Breakage!

Defective filter glasses can 

cause serious cuts by glass 

splinters when touched with 

bare hands. Wear protective 

gloves. 

 

Support the filter glass with one hand to prevent it 

from falling down when you release metal latch

 

Use a flat-head screwdriver to release the metal 

latch.

 

Take out the filter glass following the direction as 

indicated by the arrow below.

Note The contact pins of the HID quartz lamp 

are of different sizes. When re-assembling the 

lamp, do observe correct position and fit of 

contact pins. 

Summary of Contents for Future Sun HP










































































Reviews:

No comments

Related manuals for Future Sun HP

Brands by name

Popular brands

Load more brands