57
Futuresun HP V2
CAUTION!
Inappropriate filters may
have a serious impact on
the function of the facials
and exposure times. Only
use original facial filters as
provided by Advanced UV
Light.
Put in the facial filters and position in such
a way that the Dr Müller logo points to you.
Clean the facial filters with a leather cloth damped
with glass cleaner or clear water.
Reassemble the top canopy acrylic as described
on page 37.
Replacement of dust filters
The dust filter mats must be cleaned or replaced after
50 operating hours. Depending ambient conditions,
dust filters may have to be cleaned earlier.
CAUTION
RISK OF
ENVIRONMENTAL
DAMAGE!
Dispose of dust filter mats
according to environmental
standards.
Top canopy
In the top canopy the dust filter mat is positioned
between the two top canopy profiles. To replace the
filters, proceed as follows:
Take out the old dust filter mats and replace with
new ones.
Dispose of used dust filter mats according to
environmental standards. .
Sunbed
At the sunbed the dust filter is positioned below the
upper profile edge behind the front cover plate. To
replace the dust filter, proceed as follows:
Lift up the sunbed acrylic (1).
Lift the support bar (2) and push it slightly
downward (3).
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...