ADVANCED UV LIGHT Future Sun HP, Owner'S Manual

Page: 44 / 73

44
Futuresun HP V2
Survey electronic control
Menu point
operator
menu
Value Description Display OEM
pre-
set
values
Set up options
01 Operating hours for equipment 01_>xxxxx – No reset function
02 Operating hours for low-pressure lamps 02_>xxxxx – Re-set by button
combination xx
03 If the pre-set value for operating hours
low-pressure lamps has been reached,
a blinking point in the lower right corner
of the display shows up. Entering the
value “000” deactivates this function
03xxx 000
04 Operating hours HID lamps 04_>xxxxx – Re-set by button
combination xx
05 If the pre-set value for operating hours
HID lamps has been reached, a blinking
point in the lower right corner of the
display shows up. Entering the value
„000“ deactivates this function.
05xxx 000
06 00-30 External control coinbox(00) or internal
control (01-30)
06_00 00
07 00-02 AC unit always off (00),
AC unit on at start, then optional (01);
AC unit off at start, then optional(02)
07_01 01
08 00-01 Facials optional OFF (00)
No facials OFF option (01).
08_00 00
09 00-01 “STOP” button activated as
intermediate (pause) button (00)
or “STOP” button not activated as
intermediate (pause) button (01)
09_01 01
10 00-01 Cleaning function activated (00) or
Cleaning function not activated (01)
10_00 01 After equipment cool-
down time has expired,
the display shows the
demand “Clean”. After
cleaning the bed, push
the “Start” button to
cancel this message.
11 00-50 Temperature set up for heat-recycling
system
11_25 25
12 00-01 Show-light always off (00) or show-light
always on (01)
12_00 00 Select with button
combination
“SunFresh“ and with
button “–” (off) and
button “+” (on).
13 00-08 Starting level add. fan shoulder tanner 13_08 03
14 00-08 Starting level fan sunbed 14_08 03
15 00-08 Starting level fan top canopy 15_08 03
16 00-03 Delayed switch-off time facials in min. 16_00 00