31
Futuresun HP V2
Assembly of SunHaze-Aroma-System
(optional)
WARNING
RISK OF POISONING!
Do not eat the gel in the
aroma cartridge. If, by
accident, a person has
eaten of the gel, contact
physician immediately.
The aroma system can only be used in
combination with the active shoulder
tanner.
The fan in the active shoulder tanner emits the
scented air into the tanning space. A fan device above
the aroma cartridge sucks in the aromatized air and
conveys it into the airstream of the active shoulder
tanner fan.
Aroma cartridges with different scents
are available. For different scents and
replacements contact your distributor.
In order to connect the SunHaze aroma system and
to instal the aroma cartridge, proceed as follows:
Connect the hose from the shoulder tanner (red) to
the SunHaze aroma system.
Take off the lid from the aroma cartridge.
Push the holding bracket for the cartridge down
and hold down (1.).
Put the cartridge into the SunHaze aroma system
(2.) and release brakes.
Let the holding bracket go.
The bracket now presses the cartridge against the
SunHaze aroma system.
Installing the SunFresh system
(optional)
The SunFresh system can only be used
in combination with the active shoulder
tanner.
The SunFresh system allows users to enjoy a
refreshing watermist to be sprayed onto the body
during a tanning session. A special nozzle in the
active shoulder tanner vaporizes the water. This water
is pumped to the nozzle from the SunFresh container.
This container, filled with distilled water, has to be
assembled onto the assembly plate for the SunFresh
container/condensation water container inside the
sunbed. The assembly plate is located close to the
headend side of the sunbed.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...