ADVANCED UV LIGHT Future Sun HP Owner'S Manual Download Page 16

Page: 16 / 73

Futuresun HP V2

Requirements at Place of Installation

Minimum room size for operation & maintenance

min. 9‘ x 9‘

Floor, level, load capacity

min. 1,8 kN/m

Ambient temperature

50°F bis 86 °F

Relative humidity

max. 65%

Transport

DANGER!

Only authorized and skilled

personnel is allowed to

transport the sunbed.
For use of transport

vehicles: comply with

operational directives and

safety instructions provided

by manufacturer.

DANGER
FALLING LOAD!

Falling load may cause

serious or fatal personal

injuries.
Use only appropriate lifting

devices.

On delivery, the unit is pre-assembled and ﬁxed to a

wooden pallet. Additional components are delivered in

separate boxes.

DANGER
BY MOVING LOAD!

Risk of injuries by moving

load or transport vehicles.

Block all paths of transport

to trafﬁc to prevent

personal injuries caused by

transport vehicles or the

load.

WARNING
FALLING LOAD!

Due to their heavy weight,

equipment parts can cause

serious bruises when falling

down.

Wear safety shoes during

transport of equipment

Transport by fork-lift or lift truck



If the sunbed is ﬁxed to a pallet, move the forks

carefully into the openings of the pallet.



For single boxes, two persons lift them individually

onto the forks.

WARNING
TOPPLING LOAD!

The heavy load can cause

personal injury or damage

when toppling from the fork-

lift during transport. Tilt the

lift-arm slightly backwards

to prevent the load from

toppling.



Lift with load with the fork-lift or the lift truck for only

a few centimeters.



Drive the load carefully to the place of installation.

Summary of Contents for Future Sun HP










































































Search results

Summary of Contents for Future Sun HP

Reviews:

Related manuals for Future Sun HP

Brands by name

Popular brands

ADVANCED UV LIGHT Future Sun HP, Owner'S Manual

Search results

Summary of Contents for Future Sun HP

Reviews:

Related manuals for Future Sun HP

Brands by name

Popular brands