63
Futuresun HP V2
Turn the backlighting lamp for about 90° clockwise
(4.).
Put the foremost two UV-lamps back into the sunbed.
Install the two UV-lamps (1).
Turn the UV-lamps for about 90° counter clockwise
so that the lamp stamp points to the viewer (2).
The UV-lamp snaps into the holder with a “click”.
Put back the lamp covers at the head- and footend.
Lift up the sunbed acrylic for about an inch.
To put back the support bar, lift it slightly upward
and then turn it back to the left side.
Put the sunbed arylic down onto the sunbed.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...