28
Futuresun HP V2
condensation water container
Put the SunFresh container in such away into the
fixing brackets that it touches the sensor (1).
Put in the condensation water container in such
a way into the fixing brackets that it touches the
sensor(1).
.
Assembly of active shoulder tanner
(optional)
The active shoulder tanner is to be assembled to the
headend of the sunbed. The active shoulder tanner is
controlled by the control panel.
All the connections of the active shoulder tanner must
be connected to the corresponding terminals at the
ballast tray. Detailed information on the connections
and assignment of terminals is provided in the
enclosed wiring diagram. In order to assemble the
shoulder tanner, proceed as follows:
DANGER OF
ELECTRIC SHOCK!
Only certified electricians
according to EN 60204-
1/VDE 0113 are authorized
according to current EVU-
standards to perform the
electrical connection.
For export units: Local/
national standards and
regulations apply.
Eventually, you may have to disassemble the air
vents at the headend side first as described on
page 21
Take the shoulder tanner out of its transport box
and remove all packing material.
Remove the screws at the right and left side above
the HID lamps.
Take the cover off the shoulder tanner.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...