45
Futuresun HP V2
Operation
WARNING
UV-RADIATION!
UV-radiation can seriously
damage your eyes and skin.
Always wear protective
eye-wear during tanning
sessions!
Do not exceed recommended
exposure times.
Lift the top canopy open.
Lay down on the sunbed surface.
Pull the top canopy down.
The display will show total session time.
Push the “START” button.
The tanning session starts. The display will show
accrued tanning time.
If you want to stop the tanning session, push the
“STOP” button.
The tanning session stops.
If you want to continue the tanning session, push
the “START” button again.
The tanning session will only continue
if there is enough tanning time left. The
facials will only re-start after approx. 3
minutes (OEM pre-set cooling time); the
HID lamps of the shoulder tanner will re-
start after a delay time of 2 minutes (OEM
pre-set cooling time).
The tanninng session re-starts.
The tanning session stops after preset tanning time
has expired.
Lift the top canopy and leave the sunbed.
Clean and disinfect the sunbed as described in the
chapter “Cleaning”.
Optional settings at control
panel
Facials
The intensity of the facials can be
increased or reduced.
Push the button “Facials”.
To increase intensity of the facials, push the “+”
button.
To reduce the intensity of the facials, push the “–”
button.
Body cooling at top canopy
The direction of the airflow can be adjusted with the
nozzles of the air vents in the top canopy.
To change the direction of the airflow, turn nozzle
into the requested direction.
The intensity of the airflow can be
increased or reduced in different
steps.
Push the button “Body cooling top canopy”.
To increase the intensity, push the “+” button.
To reduce the intensity, push the “–” button.
Body cooling at sunbed
The intensity of the airflow can be
increased or reduced in several
steps.
Push the button “Body cooling sunbed”.
To increase intensity, push the “+” button.
To reduce intensity, push the “–” button.
AC unit
The AC unit provides a comfortable tanning
climate. When the sunbed starts, the AC unit starts
automatically (OEM pre-set).
In order to switch the AC unit on
or off, proceed as follows:
Push the button “AC unit”.
To switch off the AC unit, push the “–” button.
To switch on the AC unit, push the “+” button.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...