54
Futuresun HP V2
Two persons lift the top canopy acrylic from the
sunbed.
Assembly of top canopy acrylic
Clean and disinfect the top canopy acrylic with a
suitable acrylic cleaner.
Fix the control panel at the rear side of the top
canopy acrylic.
Push the plug through the small opening at the
rear side of the top canopy acrylic (1).
Then push the plug into the plug socket (2).
Put the new top canopy acrylic into the top canopy.
Lift the top canopy acrylic. The control cable of the
control panel must be positioned behind the cover
profile.
Cleaning and replacing
of filter glasses in active
shoulder tanner
WARNING
SHARP EDGES!
When disassembling the
filter glasses there is a risk
of curtsand bruises due to
the sharp edges of the filter
glass.
Wear protective gloves!
You need to replace the filter glasses in the active
shoulder tanner, whenever the filter glasses are
defective. Proceed as follows:
Deactive the mains disconnection switch and
secure with lock and key against accidental
activation.
Loosen the right and left screws above the HID
fields.
Take off the cover from the shoulder tanner.
With a screwdriver loosen the lowest screw at the
filter glass holder.
Take the filter glass out of the holder.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...