69
Futuresun HP V2
HID lamps
Never touch the HID lamps with bare fingers. If
cleaning is necessary, use special cleaning swab
damped in cleaning alcohol.
Filter Glasses
Wipe filter glasses with a clean leather cloth slightly
damped in glass cleaner or clear water
Disassembly of sunbed
unit
If the sunbed needs to be transported to
another location, the whole unit needs to be
disassembled.
Disassembly needs to be performed with four
persons.
DANGER
RISK OF ELECTRIC
SHOCK!
Deactivate the mains
disconnection switch
prior to disassembly work
and secure with lock and
key against accidental
activation.
DANGER
RISK OF FAULTY
DISASSEMBLY!
Improperly performed
disassembly work can lead
to serious damages and
fatal injuries.
Disassembly work must be
performed by authorized
service personnel or
certified electricians.
CAUTION!
Components can get easily
scratched. Do not kick at
components. Do not scratch
or damage surfaces - for
instance with tools.
WARNING
HEAVY LOAD!
Overstraining when
carrying the heavy sunbed
components can lead to
health risks.
Always carry the heavy
components of the sunbed
with four persons.
Disassemble equipment as described in the chapter
“Disassembly of equipment”.
Perform transport of sunbed to new site of installation
as described in the chapter “Transport”.
Storage
If the equipment is not to be operated for an
extended period of time, you should store the
sunbed in a dry, frost-free room and protected it
against dust.
Deactivate the mains disconnection switch and secure
with lock and key against accidental activation.
Cover the sunbed with appropriate material to protect
it against dust and dirt.
Re-operating unit
If you want to operate the unit again after an extended
rest period, take off the cover material.
Clean the sunbed.
Remove lock and key and activate the mains
disconnection switch.
Perform the daily check-up as described in the
chapter “Daily check-up”.
Summary of Contents for Future Sun HP
Page 72: ...72 Futuresun HP V2 ...
Page 73: ...73 Futuresun HP V2 ...