ADS 507165, Installation, Operation And Maintenance Manual, Page: 187 / 535

Configuration and Activation 4-85
z
Min Value
Input the minimum value for the incoming analog
signal which will be used to scale the data values. This value
represents the weakest signal corresponding to the incoming
4mA signal. For example, enter the value corresponding to the
lowest depth reading for a DEPTH_A1 input.
z
Max Value Input the maximum value for the incoming
analog signal which will be used to scale the data values. This
value represents the strongest signal corresponding to the
incoming 20mA signal. For example, enter the value
corresponding to the highest depth reading for a depth
(DEPTH_A1) input.
The monitor temporarily stores all incoming analog input readings
which occur between each monitor storage interval.
z
Average Select this checkbox to store the analog input
signal value as an average of all analog input readings since the
last monitor storage interval. If this checkbox is not selected,
the stored analog input value (when the
Store Data checkbox
is selected) will be the most recent analog input
reading.
Checkbox is selected by default.
z
Store Data Select this checkbox when to store the analog
input to the monitor memory at the monitor’s storage
interval. (This value is averaged or actual value depending on
whether the Average checkbox is selected.) Checkbox is
selected by default.
z
Store Min Choose this checkbox to store the lowest analog
input reading which occurs within each sample interval as the
MIN_A1 data entity.
Checkbox is selected by default.
z
Store Max Choose this checkbox to store the highest analog
input reading which occurs within each sample interval as the
MAX_A1 data entity.
Checkbox is selected by default.
z
Store Avg
Select this checkbox to store an averaged value of
the analog input signal as the AVG_A1 data entity. Checkbox
is selected by default.
Analog Output 1 (2) Configure the following values for each
analog output device (maximum of two) connected to the XIO
device.