Acer Altos easyStore M2 User Manual Download

Page: 38 / 298

2 Setting up the system

Check package contents

Check the following items from the package:

•

Altos easyStore M2 storage system

•

Power cord

•

Network cable

•

Altos easyStore M2 Installation Disc
Use this disc to install the following client software applications:

•

Install the Storage System Console. Refer to “Installing the

Storage System” on page 26 for detailed instructions.

•

Install FileSafe Express and SAN Disk Manager. Refer to

“Installing FileSafe Express and SAN Disk Manager” on page
31 for detailed instructions.

•

Quick Start Guide

•

Warranty card

If any of the above items are damaged or missing, contact your reseller
or retailer from which you purchased this product.

Summary of Contents for Altos easyStore M2










































































































































































































































































































Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands

Acer Altos easyStore M2, User Manual

Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands