Acer Altos easyStore M2 User Manual Download

Page: 83 / 298

Notes:

•

If anyone accessed a shared folder using the guest user name,

guest displays in the Users column, followed in parentheses by
the computer name.

•

Due to the nature of the NFS protocol, Linux, and other Mac

users are not listed on this page.

•

Ongoing backup or recovery activities do not appear on this

page.

•

This page indicates only that a connection with a shared folder

has been established; this does not necessarily mean that the user
has opened any files there.

Summary of Contents for Altos easyStore M2










































































































































































































































































































Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands

Acer Altos easyStore M2, User Manual

Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands