Acer Altos easyStore M2 User Manual Download

Page: 209 / 298

187

In the left pane, double-click the name of the storage system that
contains the shared folders that you want to access.

The storage system name expands to display all the available
shared folders.

Notes:

•

All shared folders appear in the left pane. However, you can

access only the ones that you are authorized to use.

•

If your storage system uses Active Directory authentication

mode, you must physically create a guest account in order to use
and create shared folders.

Summary of Contents for Altos easyStore M2










































































































































































































































































































Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands

Acer Altos easyStore M2, User Manual

Search results

Summary of Contents for Altos easyStore M2

Reviews:

Related manuals for Altos easyStore M2

Brands by name

Popular brands