37
As soon as you start the Storage System Console, it automatically
scans the network for storage systems. This might take a few
minutes. As soon as the scan is complete, the left pane displays a
tree view of all the storage systems it found.
Note: If you connect a storage system to the network after the
Storage System Console has already scanned it, or if you change
the IP address of the storage system, you must click Discover
Storage Systems to rescan the network again and update the tree
in the left pane.
If no storage system displays in the left pane, make sure your
computer is in the same subnet as the storage system and try
again.
2
In the left pane, select the name of the storage system that you
want to access (for example, Altos-easyStore), then click Log On
Storage System Manager. The login page displays.
3
Log in to the IPStor Express Manager. For more information, refer
to “Log in to the IPStor Express Manager” on page 41.
Summary of Contents for Altos easyStore M2
