Accom APR Attache, User Manual

Page: 57 / 164

Hardware Control Panel Familiarization - Ch.2
User Guide 43
2.2.5 Auto Edit Functions
V T R
D D R
A U T O E D I T
R e v i e w P r e v i e w R e c o r d e r E n a b l e
S T O P
)LJXUH $XWR (GLW 6HFWLRQ
This button (together with the button) engages the Auto Edit
function, which performs a machine-to-machine automatic edit
between the Attaché and an external VTR (or DDR) connected to
the “Master” RS422 serial control port on the rear panel of
Attaché. To set up and perform the Auto Edit functions, the
button must be turned ON.
For complete instruction on using the Auto Edit feature, please
refer to the Auto Edit operational procedures in Chapter 4.
This button is used in conjunction with the Auto Edit function.
The button is active only if the button is turned ON, and
when the minimum criteria for an Auto Edit event have been set.
Refer to the description of Auto Edit (above) for more
information.
When the Auto Edit criteria are set, pressing the button
performs an Auto Edit Preview. The LED within button
illuminates. The record and player devices seek to their respective
preroll points, and play through the preroll interval. At the auto
edit IN point, the record device switches to Bypass ON, through
which the player device is monitored. At the auto edit OUT point,
the record device switches back to off-disk (or off-tape) playback.
At the end of the post-roll interval, both player and recorder stop.
The LED within button turns OFF when the preview is
A U T O E D I T
S T O P