Accom APR Attache, User Manual

Page: 129 / 164

Hardware Control Panel Familiarization - Ch.2
User Guide 115
only one drive within the array is possible. Formatting takes approximately 10 to
15 minutes for each drive. A password is required to format any of the drives.
7R )RUPDW D 6,1*/( 'LVN
Using the numeric keypad, type the number of the disk that you would like to
format, then press
to initiate the format process. A warning message
will appear on the status menu overlay. You are then required to enter a numeric
password to start the format procedure. See Section 4.10.3 in this manual for
complete information.
7R )RUPDW D $// 'LVNV
Directly press to format all drives (without first making a numeric entry
in the numeric keypad). A warning message will appear on the status menu
overlay. You are then required to enter a numeric password to start the format
procedure. Refer to Section 4.10.3 in this manual for complete information.
■
:$51,1*
■
Using the Format Disk Array function will destroy all video, key and audio
data currently residing on the disks at time of format. Use this function
with extreme caution!
❏
F8 Software Version
The main Attaché operating software version is displayed on the same line as
softkey
. When you press softkey (
Software Version
), the
software creation date and time are also displayed on the status menu overlay.