Accom APR Attache, User Manual

Page: 158 / 164

Accom APR
yy$WWDFKp Digital Disk Recorder
144 User Guide
you had made prior to installing the audio option will
present “static” when played after installing the option.
In such a case, the default “OFF” setting for the
Program Mute function changes to “OFF (Auto)”. This
indicates that there is no valid audio on the disk, and
the audio output will be automatically muted when an
attempt to play the disk is made.
After you make a valid audio recording, the valid audio
material will not be muted. Once you have recorded
valid audio (or silence or tone) over the entire disk and
then reboot the Attaché, you will find that this Program
Mute selection is no longer available.
Â
ON
Mutes the audio on both the main audio and headphone
audio outputs.
❏
F4 Headphone Vol (Volume)
This parameter is used to adjust the volume of the headphone output. This setting
does not affect the main audio output. The indicator in the right column displays the
current volume setting; from 1 (lowest) to 11! (highest). There are three ways of
adjusting the volume setting:
1. Toggle Method. To change the audio Headphone Vol parameter by toggling the
softkey repeatedly:
ƒ
Press
Headphone Vol
Toggle the softkey until the desired volume is attained.
2. Numeric Method. To change the audio Headphone Vol parameter by a precise
number:
ƒ
Type the desired volume setting into the numeric keypad (from 1 to 11),
and then...
ƒ
Press
Headphone Vol
3. Rotary Knob Method. To change the audio Headphone Vol parameter by use of
the rotary knob on the Attaché control panel: