manualshive.com logo in svg

ABB IRB 6730, Product Manual

The ABB IRB 6730 product manual is available for free download on our website. This comprehensive manual offers detailed instructions and information on how to effectively operate and maintain the ABB IRB 6730. Enhance your experience with this exceptional industrial robot by accessing the manual on manualshive.com.

Share
Download
background image

Refitting the axis-3 gearbox

Note

Action

Guide pin, M12x150 / Guide pin, M12x200:
3HAC13056-2 / 3HAC13056-3

Fit two guide pins in opposite holes.

Tip

Use different lengths on the guide pins to
simplify guidance.

1

Always use guide pins in pairs.

xx2300000210

Tip

Lubricate the guide pins with some grease
to make the lower arm slide better.

xx2300000202

Lift the gearbox and let it rest on the guide
pins.

2

Remove the lifting accessory.

DANGER

There is a risk that the gearbox may glide
out and fall down if it is too far out to on the
guide pins and no stoppers are used.

3

Hex socket head cap screw : M12x50 12.9
Gleitmo 603+Geomet 500 (32 pcs ).

Slide the gearbox into position and fit the
attachment screws and washers.

4

xx2300000154

Continues on next page

Product manual - IRB 6730

563

3HAC085699-001 Revision: B

© Copyright 2023 ABB. All rights reserved.

5 Repair

5.9.3 Replacing the axis-3 gearbox

Continued

Summary of Contents for IRB 6730





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IRB 6730

Omron TM Quick Start Manual preview
TM
Brand: Omron Pages: 10
Brooks PreciseFlex PFDD4 Reference Manual preview
PreciseFlex PFDD4
Brand: Brooks Pages: 145
SuperDroid Robots TP-302-001 Quick Start Manual preview
TP-302-001
Brand: SuperDroid Robots Pages: 6
MangDang Technology Mini Pupper Manual preview
Mini Pupper
Brand: MangDang Technology Pages: 106
Eckstein komponente Keyestudio 4WD Mecanum Robot Car Manual preview
Keyestudio 4WD Mecanum Robot Car
Brand: Eckstein komponente Pages: 369
Makeblock mScara User Manual preview
mScara
Brand: Makeblock Pages: 19
Okuma STANDROID Setup Instructions preview
STANDROID
Brand: Okuma Pages: 4
STEMLABS NAO Reference Manual preview
NAO
Brand: STEMLABS Pages: 33
PadBot P2 User Manual preview
P2
Brand: PadBot Pages: 17
Vex Robotics Girl Powered VEX IQ Speed Build Manual preview
Girl Powered VEX IQ Speed Build
Brand: Vex Robotics Pages: 8
Meccano SET 10 199903 Instructions Manual preview
SET 10 199903
Brand: Meccano Pages: 60
FUTURE KIT AVR1 SUPER SUMO ROBOT Manual preview
AVR1 SUPER SUMO ROBOT
Brand: FUTURE KIT Pages: 3
Elephant Robotics myCobot 280 Manual preview
myCobot 280
Brand: Elephant Robotics Pages: 16

Brands by name

Popular brands

Load more brands