ABB IRB 6730, Product Manual

Page: 147 / 660

4.4.4 Changing the oil in axis-3 gearbox
Location of the gearbox and oil plugs
The gearbox and its oil plugs are located as shown in the figure.
xx2300000143
Oil plug with nipple for draining and filling with an oil dispenser A
Oil plug hole for venting and inspection B
Required tools and equipment
Note Article number Equipment
The capacity of the vessel must
be sufficient to take the complete
amount of oil. - Oil collecting vessel
One example of oil dispenser can
be found in section
Type of lubric-
ation in gearboxes on page 135 .
- Oil dispenser
Content is defined in section
Standard toolkit on page 648 .
- Standard toolkit
Required consumables and wear parts
Note Article number Wear part
See Type of lubrication in gearboxes
on page 135 .
- Lubricating oil
Used on oil plug. Always replace when
refitting oil plug. 3HAC061327-059 O-ring, G 1/2"
Required documents
Note Document number Document name
3HAC042927-001 Technical reference manu-
al - Lubrication in gearboxes
Continues on next page
Product manual - IRB 6730 147
3HAC085699-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.4.4 Changing the oil in axis-3 gearbox