ABB IRB 6730, Product Manual, Page: 284 / 660

Required service parts
Note Article number Consumable
Replace if damaged.
On axis-6 motor 3HAC079381-003 (Graphite White)
3HAC079381-004 (ABB Orange) Connection box
cover MT100X with
gasket
Replace if damaged.
On axis-5 motor 3HAC072863-003 Connection box
cover with gasket
Replace if damaged. 3HAC078635-004 (Graphite White)
3HAC078635-005 (ABB Orange) Wrist cover
3HAC057966-003 Cable strap, out-
door
Deciding calibration routine
Decide which calibration routine to be used, based on the information in the table.
Depending on which routine is chosen, action might be required prior to beginning
the repair work of the robot, see the table.
Note Action
Decide which calibration routine to use for
calibrating the robot.
• Reference calibration. External cable
packages (DressPack) and tools can
stay fitted on the robot.
• Fine calibration. All external cable
packages (DressPack) and tools
must be removed from the robot.
1
Follow the instructions given in the refer-
ence calibration routine on the FlexPendant
to create reference values. If the robot is to be calibrated with refer-
ence calibration:
Find previous reference values for the axis
or create new reference values. These val-
ues are to be used after the repair proced-
ure is completed, for calibration of the ro-
bot.
Creating new values requires possibility to
move the robot.
Read more about reference calibration for
Axis Calibration in
Reference calibration
routine on page 614 . If no previous reference values exist, and
no new reference values can be created,
then reference calibration is not possible.
If the robot is to be calibrated with fine
calibration:
Remove all external cable packages
(DressPack) and tools from the robot.
Removing the wrist
Use these procedures to remove the wrist.
Preparations before removing the wrist
Note Action
Decide which calibration routine to use,
and take actions accordingly prior to begin-
ning the repair procedure. 1
Remove tools and other equipment fitted
to the wrist. 2
Continues on next page
284 Product manual - IRB 6730
3HAC085699-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.6.1 Replacing the wrist
Continued