Communication protocol 145
13
Fault Code
Get
The fault that caused the last
transition to the Faulted state.
DRIVECOMM codes are
reported. See the drive
manual for further information
on the DRIVECOMM codes.
UINT16
14
Warning Code
Get
Code word indicating a
warning. If multiple warnings
are present, the lowest code
value is displayed.
DRIVECOMM codes are
reported. See the drive
manual for further information
on DRIVECOMM codes.
UINT16
15
CtlFromNet
Get
0 = NetControl disabled
1 = NetControl enabled
BOOL
16
DNFaultMode
Get, Set
2 = Vendor specified
UINT8
17
ForceFault
Get, Set
0
→
1 forces the drive to
fault
BOOL
#
Attribute
name
Services
Description
Data
type
Summary of Contents for FDNA-01
